Camera Updates

Evolve 512 updates:

• Sequenced Multiple Acquisition Real Time Streaming Support (SMART Streaming)
  • Number of sequenced exposure times increased from 6 to 12 for the Evolve 512
  • Removed an extra exposure trigger signal that was being generated

Evolve 128 updates:

• Trigger First Mode with updated Overlap functionality provides higher frame rates.
• Stobe Mode Triggering with updated Overlap functionality provides higher frame rates.
• Improved Dual-Camera triggering performance.

Installation Instructions:

1. Download the update
2. Connect and turn on only the camera you intend to update
3. Run the camera update application. Do not turn off or disconnect the camera during the camera update
4. Accept the prompt to update
5. After the update has completed, power-cycle the camera to allow the changes to take effect

Instructional Video:

NOTE: Make sure that no other program is open while the camera is being updated.

NOTE: Do NOT use with Evolve 512 or Evolve 128 cameras.